Bed structure, including four height-adjustable corner supports.
EASY is a bed system that was designed to accommodate several bases with four corner supports that are adjustable in height. This bed is perfect when used with the Simple and Double bed frames or with the Flat Low and Spring bed bases.
Bed structure, including four height-adjustable corner supports.
This bed system has four height-adjustable corner supports and a single slat bed platform in beech plywood with a metal frame. It has a dual support bar in the wider double bed.
This bed system has four height-adjustable corner supports and, in the double bed version, two single bed bases with beech plywood slats and metal frames, joined together with a special hooking system.
This bed system has four height-adjustable corner supports and a contoured reduced height platform made of wood, with an elegant non-slip cover.
This bed system is composed of the bed structure and an exclusive support system equipped with highly ergonomic independent micro-springs. It rests on a platform covered with an elegant non-slip cover.
CASE is a bed system that is equipped with a classic storage space with 45° lift, facilitated by means of gas pistons. It can be combined with a Simple or Double bed frame or with the Flat High bed platform.
TRADITIONAL OPENING MECHANISM
Open the storage by pulling the handle upwards to unlock the mechanism, and continue pulling up the base by hand until it is fully open.
CASE, CASE X2 AND MATIC CASE
The bottom of the storage beds has two removable panels, supported by a central bar, which make cleaning easy and comfortable, even in the most hard-to-reach areas.
(1) Complete bottom of the storage
(2) One panel removed
(3) Both panels removed
This bed system is composed of the bed structure, a classic storage with a 45° lift supported by gas pistons, and a single slat bed base in beech plywood with a metal frame. It has a dual support bar in the double bed version.
This bed system is composed of the bed structure and a classic storage with a 45° opening system supported by gas pistons. The double bed version has two single bases with beech plywood slats and metal frames, joined together with a special hooking system.
This bed system is composed of the bed structure and a classic storage with a 45° opening system supported by gas pistons. It has a contoured high thickness platform made of wood, covered with an elegant non-slip cover.
CASE X2 is a bed system equipped with a double lift. Thanks to a special double gas piston mechanism you can lift the bed base and the mattress either at a 45° angle or parallel to the floor. Making up the bed will be quite simple and a lot less strenuous. CASE X2 is designed to be combined with Simple and Double bed frames or a Flat High bed platform.
OPENING CASE X2
Open the storage by pulling the handle upwards to unlock the mechanism (1A) and continue by pulling up the base by hand until it is fully open (2A).
For greater comfort while you are changing the sheets, pull the handle and unlock the mechanism (1B), pull the platform parallel to the floor until it locks (2B). When you are finished, simply push the mattress forward and back into position (3B).
This is a bed system equipped with a double lift. It has a special double gas piston system mechanism and a single slat bed base in beech plywood with a metal frame. It has a dual support bar in the double bed version.
This bed system is composed of an upholstered bed and a double lift thanks to the gas piston system. The double bed version has two single bases with beech plywood slats and a metal frame, joined together with a special hooking system.
This bed system is composed of the bed structure and a double lift storage supported by gas pistons. It has a contoured high thickness platform made of wood, covered with an elegant non-slip cover.
CASE, CASE X2 AND MATIC CASE
The bottom of the storage beds has two removable panels, supported by a central bar, which make cleaning easy and comfortable, even in the most hard-to-reach areas.
(1) Complete bottom of the storage
(2) One panel removed
(3) Both panels removed
MATIC CASE is a bed system that is equipped with a storage that has an electrically powered base that helps you open and close the storage compartment by means of two simple buttons that can be operated with your foot. The bed system can be combined with the Simple and Double bed frames and the Flat High platform.
ELECTRIC OPENING MECHANISM
The motorised system allows you to lift up and close the storage easily, with two buttons that are hidden under the bed. They are operated by foot.
This bed system has a bed structure that is equipped with a storage that has an electrically powered single slat base in beech plywood with a metal frame. It has a dual support bar in the double bed version.
This bed system has a bed structure that is equipped with a storage that has an electrically powered platform. The double bed version has two single bases with beech plywood slats and metal frames, joined together with a special hooking system.
This bed system is equipped with storage space and has an electrically powered, contoured high thickness platform base made of wood, covered with an elegant non-slip cover.
CASE, CASE X2 AND MATIC CASE
The bottom of the storage beds has two removable panels, supported by a central bar, which make cleaning easy and comfortable, even in the most hard-to-reach areas.
(1) Complete bottom of the storage
(2) One panel removed
(3) Both panels removed